Skip Navigation
Oklahoma State University

Sallam, Khaled A.

Associate Professor

Mechanical and Aerospace Engineering
Oklahoma State University
Helmerich Research Center 122
Tulsa, Oklahoma 74106 USA
Phone: (405) 762-0749
E-mail: khaled.sallam@okstate.edu

 

Areas of Interest

  • Fluid Dynamics
  • Laser Diagnostics
  • Holography
  • Atomization & Sprays
  • Droplet-based Microfluidics
  • Nanofibers and Nanoparticles
  • Bio-Flows

Academic Background

Ph.D. Aerospace Engineering, The University of Michigan, Ann Arbor
M.S. Aerospace Engineering, The University of Michigan, Ann Arbor
M.E. Mechanical Power Engineering, Cairo University, Egypt
B.S. Mechanical Power Engineering, Cairo University, Egypt

Teaching Interests

ENSC 3233.801 Fluid Mechanics
MAE 3013.801 Engineering Analysis
MAE 3233.801 Heat Transfer
MAE 3293.801 Compressible Fluid Flow
MAE 4243.801 Propulsion and Power
MAE 4263.801 Energy Conversion
MAE 4273.801 Experimental Fluid Dynamics
MAE 5243.001 Micro Flows
MAE 5253.001 Multiphase Flow

Positions

Associate Professor, Oklahoma State University, 7/2009 - present
Assistant Professor, Oklahoma State University, 8/2003 - 6/2009
Summer Faculty Fellow, Air Force Research Lab, Wright-Patterson Air Force Base, 5/2008 - 7/2008
Postdoctoral Fellow, The University of Michigan, Ann Arbor, 1/2002 - 7/2003
Research Assistant, The University of Michigan, Ann Arbor, 8/1997- 12/2001
Teaching Assistant, Cairo University, Egypt, 10/1993 - 7/1997

Professional Organizations

Associate Fellow of the American Institute of Aeronautics and Astronautics (AIAA)
Member of the American Society of Mechanical Engineers (ASME International)
Member of the American Physical Society (APS)

Professional Society Service

Member, Fluid Dynamics Technical Committee, 2007-2010, AIAA
Member, Experimental and Theoretical Fluid Dynamics Technical Subcommittee, 2007-2010, AIAA
Member, Best Paper Award Standing Committee, 2007-2010, AIAA
Member, CIFS Committee, 2007-2010, APS
Session Co-Chair, 46th AIAA Aerospace Sciences Meeting, January 2008, Reno, Nevada
Session Chair, APS 60th Annual Meeting of the Divison of Fluid Dynamics, November 2007, Salt Lake City, Utah
Session Co-Chair, 18th Computational Fluid Dynamics Conference, June 2007, Miami, Florida
Session Co-Chair, ILASS 20th annual meeting, May 2007, Chicago, Illinois
Session Chair, AIAA/ASME Oklahoma 26th Symposium, April 2006, Norman, Oklahoma
Session Chair, AIAA/ASME Oklahoma 25th Symposium, February 2005, Stillwater, Oklahoma

Professional Distinctions

The President’s Outstanding Teaching Award, OSU-Tulsa, 2014
Lockheed Martin Aeronautics Teaching Excellence Award, Oklahoma State University, 2014
Halliburton Excellent Young Teacher Award, Oklahoma State University, 2007
The W.R. Marshall Award, ILASS-Americas, Toronto, Canada, 2006
Distinguished Achievement Award, The University of Michigan, 2001
Rackham Predoctoral Fellowship, The University of Michigan, 2000
Member of Tau Beta Pi, The Engineering Honor Society, 8 April 2000

Publications and Presentations

S. Simon, and K.A. Sallam, “Simulation of the Flow of Single Stranded DNA through a Microchannel using Dissipative Particle Dynamics,” Proceedings of 2nd Thermal and Fluids Engineering Conference, Las Vegas, Nevada, April 2-5, 2017.

A. Choudhari, and K.A. Sallam, “Simulation of Supersonic Injection of Aerated Liquid Jet,” Proceedings of 2nd Thermal and Fluids Engineering Conference, Las Vegas, Nevada, April 2-5, 2017.

N. Davis, and K.A. Sallam, “Modeling of Membrane Fouling for Rotating Filtration Systems,” Proceedings of 2nd Thermal and Fluids Engineering Conference, Las Vegas, Nevada, April 2-5, 2017.

A. Herrington, and K.A. Sallam, “On PIV measurements of Diffusion Flames,” Proceedings of 2nd Thermal and Fluids Engineering Conference, Las Vegas, Nevada, April 2-5, 2017.

J. Lee and K.A. Sallam (2017), “Column Thickness Variation of 100-mm Liquid Jets in Still Air,” Atomization and Sprays, 17 (1): 1-13.

K.A. Sallam, K.-C. Lin, S.D. Hammack, and C.D. Carter, “Digital Holographic Analysis of the Breakup of Aerated Liquid Jets in Supersonic Crossflow,” AIAA Paper No. 2017-1957, 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas, January 2017.

A. Adebayo, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Drop Size and Velocity Distributions of the Spray of Aerated Injection in Subsonic Crossflow,” Proceedings of ICLASS 2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, August 23-27, 2015.

J. Lee and K.A. Sallam, “Column Thickness Variation of Micro Liquid Jets in Still Air,” Paper No. AJK2015-30720, Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference 2015, Seoul, Korea, July 26-31, 2015 (extended abstract only).

Olinger, D.S., Sallam, K.A., Lin, K.-C., and Carter, C.D., (2014) "Digital Holographic Analysis of the Near Field of Aerated-Liquid Jets in Crossflow," Journal of Propulsion and Power, Vol. 30, No. 6, pp. 1636-1645, doi: http://arc.aiaa.org/doi/abs/10.2514/1.B34984.

Lee, J., and Sallam, K.A., (2014), “Three Dimensional Trajectory of Electrospun Polymer Solution Jet using Digital Holographic Microscopy,” Polymer Engineering and Science, Vol. 54, No. 8, pp. 1765-1773.A. Adebayo and K.A. Sallam, “Secondary Breakup Effects on Fuel Atomization in Crossflow,” Proceedings of the 34th Oklahoma AIAA/ASME Symposium, March 29, 2014, Edmond, OK (Abstract Only).

A. Adebayo and K.A. Sallam, “Drop Size Distribution of Fuel Spray Injected in High Speed Crossflow,” OSU in Tulsa Research Day, February 21, 2014, Tulsa, OK (Poster Only).

A. Adebayo, K.A. Sallam, K.-C. Lin, C.D. Carter, “Drop Size Distributions of Aerated Liquid Jets Injected in Subsonic Crossflow,” APS 66th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 58, No. 18, pp. 256, 2013 (Abstract Only).

D.S. Olinger, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Image Processing Algorithms for Digital Holographic Analysis of Near-Injector Sprays,” Proceedings of the ILASS Americas, 25th Annual Conference on Liquid Atomization and Spray Systems, Pittsburgh, PA, May 2013.

D.S. Olinger, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Digital Holographic Analysis of Near-Field Aerated Liquid Jets in Crossflow. Part II: Measurements,” AIAA Paper No. 2013-0167, 51th AIAA Aerospace Sciences Meeting, Grapevine, Texas, January 2013.

D.S. Olinger, J. Lee, A. Osta, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Digital Holographic Analysis of Near-Field Aerated Liquid Jets in Crossflow. Part I: Algorithm Development,” AIAA Paper No. 2013-0164, 51th AIAA Aerospace Sciences Meeting, Grapevine, Texas, January 2013.

A.R. Osta, J. Lee, K.A. Sallam, and K. Fezzaa, (2012) "Study of the Effects of the Injector Length/Diameter ratio on the Surface Properties of Turbulent Liquid Jets in Still Air using X-ray Imaging," International Journal of Multiphase Flow 38: 87–98.

D. Olinger and K.A. Sallam, "Automatic Digital Holographic Analysis of Dispersed Flows," 2012 OSU in Tulsa Research Day, April 4, 2012, Tulsa, OK (Poster Only).

D. Olinger and K.A. Sallam, "Automatic Digital Holographic Analysis of Aerated Liquid Jet in Cross Flow," Proceedings of the 32nd Oklahoma AIAA/ASME Symposium, March 11, 2012, Tulsa, OK (Abstract Only).

C.-L. Ng and K.A. Sallam, "Simulation of Laminar Liquid Jets in Gaseous Crossflow before the Onset of Primary Breakup," ASME paper No. IMECE2011-65338, Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, Colorado, November 11-17, 2011.

E. Vaishnav and K.A. Sallam, "The Aerodynamic Performance of a Vertical Axis Wind Turbine," 22nd OSU Research Symposium, February 25, 2011, Tulsa, Oklahoma (Poster Only).

A.R. Osta and K.A. Sallam, (2010) "Nozzle-Geometry Effects on the Upwind Surface Properties of Turbulent Liquid Jets in Gaseous Crossflow," J. Prop. Power 26(5):936-946.

K. Choi, D. Branson, A.R. Osta, and K.A. Sallam, "Preparation of Electrospun TPU/PCMs Nanofibers as a Thermostatic Clothing Material," TechConnect World Conference and Expo, June 21-24, 2010, Anaheim, CA (Poster Only).

K. Saini, and K.A. Sallam, "Velocity Measurements of Dispersed Flows Using HPIV," Proceedings of the 30th Oklahoma AIAA/ASME Symposium, Saturday, April 10, 2010, Stillwater, OK (Abstract Only).

R. Singh, and K.A. Sallam, "Spatial-Calibration of Double-View Holographic Particle Analyzer," Proceedings of the 30th Oklahoma AIAA/ASME Symposium, Saturday, April 10, 2010, Stillwater, OK (Abstract Only).

A.R. Osta, and K.A. Sallam, "Investigating Liquid Jet Surface Characteristics Using Digital Holography and X-Ray Phase Contrast Techniques," Proceedings of the 30th Oklahoma AIAA/ASME Symposium, Saturday, April 10, 2010, Stillwater, OK (Abstract Only).

D.S. Olinger, and K.A. Sallam, "Digital Holographic Spray Analysis of the Near Injector Region," Proceedings of the 30th Oklahoma AIAA/ASME Symposium, Saturday, April 10, 2010, Stillwater, OK (Abstract Only).

A.R. Osta, K.A. Sallam, K. Choi, and D. Branson, "Coaxial Electrospinning of Nanofibers using a Single Nozzle using Pressure Injection at Elevated Temperatures," Proceedings of the 30th Oklahoma AIAA/ASME Symposium, Saturday, April 10, 2010, Stillwater, OK (Abstract Only).

K.A. Sallam, K.-C. Lin, and C. Carter, "Spray Structure of Aerated Liquid Jets using Double-View Digital Holography," AIAA paper No. 2010-194, 48th AIAA Aerospace Sciences Meeting, Orlando, Florida, January 2010.

Shukla, R. and Sallam, K.A., (2009) "Effect of Liquid Transparency on Laser-Induced motion of Drops," J. Fluids Engineering 131(8):081301-1–081301-7.

J. Lee, J., K.A. Sallam, K.-C. Lin, K.-C., and C.D. Carter, (2009), "Spray Structure in Near-Injector Region of Aerated Jet in Subsonic Crossflow," J. Prop. Power 25(2):258-266.

J. Lee, B. Miller, and K.A. Sallam, (2009), "Demonstration of Digital Holographic Diagnostics for the Breakup of Liquid Jets Using a Commercial-Grade CCD Sensor," Atom. Sprays, 19(5):445-456.

R. Singh, K. Saini, A. Osta, and K.A. Sallam, "Auto-Calibrated Double-View Holographic Particle Analyzer," Oklahoma Research Day, November 13, 2009, Broken Arrow, Oklahoma (Poster Only).

K. Saini, R. Singh, A. Osta, and K.A. Sallam, "Holographic Particle Image Velocimetry for Turbulent Dispersed Flows," Oklahoma Research Day, November 13, 2009, Broken Arrow, Oklahoma (Poster Only).

E. Vaishnav, P. Deshmukh, and K.A. Sallam, "Harnessing the Wake Energy of Moving Vehicles by Micro Wind Turbines," Oklahoma Research Day, November 13, 2009, Broken Arrow, Oklahoma (Poster Only).

S. Ariekela and K.A. Sallam, "Simulation of the Nozzle Flow during the Synthesis of Core-Shell Structured Nanofibers," Oklahoma Research Day, November 13, 2009, Broken Arrow, Oklahoma (Poster Only).

P. Deshmukh and K.A. Sallam, "A Numerical Model of a Personal Micro Wind Turbine," Oklahoma Research Day, November 13, 2009, Broken Arrow, Oklahoma (Poster Only).

A.R. Osta, J. Lee, K.A. Sallam, and K. Fezzaa, "X-Ray Diagnostics for the Breakup of Round Liquid Jet in Still Air," Oklahoma Research Day, November 13, 2009, Broken Arrow, Oklahoma (Poster Only).

A. Osta, J. Lee, K.A. Sallam, and K. Fezzaa "Investigating the Effect of the Injector Length/Diameter ratio on the Primary Breakup of Liquid Jets using X-ray Diagnostics," Proceedings of 11th International Conference on Liquid Atomization and Spray Systems, Vail, Colorado, July 26–30, 2009.

J. Lee and K.A. Sallam, "Three-Dimensional Motion of Polymer Jets during Electrospinning of Nanofibers," Oklahoma EPSCoR Annual State Conference, March 31 – April 1, 2009, Oklahoma City, Oklahoma (Poster Only).

J. Lee and K.A. Sallam, "Three-Dimensional Motion of Polymer Jets during Electrospinning of Nanofibers," 20th Annual OSU Research Symposium and Research Scholar Conference Wednesday, February 18 - 20, 2009 (Poster Only).

A. Osta and K.A. Sallam, "The Effect of the Nozzle Length to Diameter Ratio on the Surface Properties of Turbulent Liquid Jets in Gaseous Crossflow," AIAA paper No. 2009-1374, 47th AIAA Aerospace Sciences Meeting, Orlando, Florida, January 2009.

D.S. Olinger, K.A. Sallam, K.-C. Lin, and C. Carter, "Effects of GLR on the Spray Structure in the Near- Injector Region of Aerated Liquid Jets in Subsonic Crossflow," AIAA paper No. 2009-1373, 47th AIAA Aerospace Sciences Meeting, Orlando, Florida, January 2009.

B. Miller, K.A. Sallam, M. Bingabr, K.-C. Lin and C. Carter (2008), "Breakup of Aerated Liquid Jets in Subsonic Crossflow," J. Prop. Power 24(2):253-258.

C.-L. Ng, R. Sankarakrishnan, and K.A. Sallam (2008), "Bag Breakup of nonturbulent liquid jets in crossflow," Int. J. Multiphase Flow 34(3):241-259.

J. Lee and K.A. Sallam, "Orthogonal Double View Digital Holographic Diagnostics for Random Motion of Micro Polymer Jet by Electrospinning," APS 61th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 53, No. 15, pp. 127, 2008 (Abstract Only).

A. Osta and K.A. Sallam, "Effect of Nozzle Passage Length on the Surface Properties of Turbulent Liquid jets in Cross°ow," APS 61th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 53, No. 15, pp. 145, 2008 (Abstract Only).

D.S. Olinger and K.A. Sallam, "Toward a Fully-Automated Digital Holographic Spray Analyzer," AIAA Paper No. 2008-4045, 38th Fluid Dynamics Conference, Seattle, Washington, 2008.

D.S. Olinger, J. Lee, A. Osta, and K.A. Sallam, "Single- and Double-View Digital Holographic Diagnostics for Sprays," 21st Annual ILASS-Americas Conference, Orlando, Florida, May 18–21, 2008.

J. Lee, and K.A. Sallam, "Holographic Diagnostics for the Breakup of Micro Liquid Jets," Proceedings of the 28th Oklahoma AIAA/ASME Symposium, Saturday, March 8, 2008, Tulsa, OK (Abstract Only).

A. Osta, D. Olinger, and K.A. Sallam, "Investigating the Onset of Primary Breakup of Liquid Jets Using Digital Holographic Microscopy," Proceedings of the 28th Oklahoma AIAA/ASME Symposium, Saturday, March 8, 2008, Tulsa, OK (Abstract Only).

K.A. Sallam, A.M. El-Leathy, A. Narasimhan, and V. Joseph, "The Mechanism of Beads Formation during Electrospinning of Biodegradable Nanofibers," NanoFocus and OKlahoma NSF EPSCoR Annual State Conference, Oklahoma City, Oklahoma, March 6-7, 2008 (Poster Only).

J. Lee, K.A. Sallam, K.-C. Lin and C. Carter, "Spray Structure in Near-Injector Region of Aerated Jet in Subsonic Crossflow," AIAA paper No. 2008-1043, 46th AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2008.

A.R. Osta and K.A. Sallam, "Effect of Injector Length/Diameter Ratio on the Breakup of Round Liquid Jet in Crossflow," AIAA paper No. 2008-1040 2008, 46th AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2008.

K. Lee, C. Aalburg, F.J. Diez, G.M. Faeth, and K.A. Sallam (2007), "Primary Breakup of Turbulent Round Liquid Jets in Uniform Crossflows," AIAA Journal 45(8):1907-1916.

A.M. El-Leathy and K.A. Sallam, "Effect of Polymer Concentration on Beads Formation during Electro Spinning of Nanofibers," Twelfth International Conference on Aerospace Sciences and Aviation Technology, ASAT-12, May 29-31, 2007, Cairo, Egypt.

R. Shukla and K.A. Sallam, "Effect of Liquid Transparency on Laser-Induced-Motion of Drops," APS 60th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 52, No. 17, pp. 22-23, 2007 (abstract only).

D. Olinger and K.A. Sallam, "Automating Digital Holographic Spray Analysis," APS 60th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 52, No. 17, pp. 151, 2007 (abstract only).

K.A. Sallam, A. Osta, and A.M. El-Leathy, "Instabilities of Charged Liquid Jet of Polymer Solution and Electrospinning of Nanofibers," APS 60th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 52, No. 17, pp. 269, 2007 (abstract only).

A. Osta and K.A. Sallam, "Effect of Nozzle Length/Diameter Ratio on the Breakup of Liquid Jets in Crossflow," APS 60th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 52, No. 17, pp. 150, 2007 (abstract only).

J. Lee and K.A. Sallam, "Breakup of Micro Liquid Jets in Crossflow," APS 60th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 52, No. 17, pp. 247, 2007 (abstract only).

J. Lee, B. Miller, K.A. Sallam, and M. Bingabr, "Digital Double-Pulsed Microscopic Holography Diagnostics for Sprays using Commercial-Grade CCD," International Conference on Multiphase Flow, ICMF 2007, Leipzig, Germany, July 9 – 13, 2007.

J. Lee, B. Miller, K.A. Sallam, K.-C. Lin, and C. Carter, "Velocity and Size Measurements of Aerated Spray using Digital Microscopic Holography," ILASS-AMERICAS 2007, May 15-18, 2007 - Chicago, Illinois.

A. Narasimhan, A.M. El-Leathy, and K.A. Sallam, "Electrospinning of Polymeric Nano-Spheres," Oklahoma NSF EPSCoR Annual State Conference, Stillwater, Oklahoma, May 17, 2007 (Poster only).

A. Narasimhan, J. Lee, A.M. El-Leathy, and K.A. Sallam, "Generation of Biodegradable Nano-Spheres," 5th annual NanoMaterials for Defense Applications Symposium: Accelerating the Transition, 23 - 26 April 2007 in San Diego, CA. (Poster only).

R. Shukla and K.A. Sallam, "Laser Induced Micro Drop Motion," Proceedings of the 27th Oklahoma AIAA/ASME Symposium, Saturday, March 31, 2007, Tulsa, OK (Abstract Only).

A. Osta, and K.A. Sallam, "Effect of Injector Length/Diameter Ratio on the Breakup of Liquid Jets in Crossflow," Proceedings of the 27th Oklahoma AIAA/ASME Symposium, Saturday, March 31, 2007, Tulsa, OK (Abstract Only).

B. Miller, K.A. Sallam, M. Bingabr, K.-C. Lin and C. Carter, "Secondary Breakup of Aerated Liquid Jets in Subsonic Crossflow," AIAA paper No. 2007-1342, 45th AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2007.

K.A. Sallam, C. Aalburg, G.M. Faeth, K.-C. Lin, C.D. Carter, and T.A. Jackson (2006), "Primary Breakup of Aerated-Liquid Jets in Supersonic Crossflows," Atomization and Sprays 16(6):657-672.

K.A. Sallam, C.-L. Ng, and R. Sankarakrishnan, "On Breakup Regime Transitions of Liquid Jets in Gaseous Crossflow," APS 59th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 51, No. 9, pp. 95, 2006 (abstract only).

B. Miller, K.A. Sallam, K.-C. Lin, and C. Carter, "Digital Holographic Spray Analyzer," ASME paper No. FEDSM2006-98526, ASME Joint U.S.-European Fluids Engineering Summer Meeting, Miami, Florida, July 2006.

S. Bogadi and K.A. Sallam, "Primary Breakup of a Charged Round Liquid Jet in a Cross Electric Field," Proceedings of the 26th Oklahoma AIAA/ASME Symposium, Saturday, April 15, 2006, Norman, OK (Abstract only).

B. Miller and K.A. Sallam, "Digital In-Line Holography and its Use in Spray Diagnostics," Proceedings of the 26th Oklahoma AIAA/ASME Symposium, Saturday, April 15, 2006, Norman, OK (Abstract only).

C.-L. Ng, K.A. Sallam, H.M. Metwally, and C. Aalburg, "3D Simulation of Round Nonturbulent Liquid Jets in Uniform Gaseous Crossflow," Proceedings of the 26th Oklahoma AIAA/ASME Symposium, Saturday, April 15, 2006, Norman, OK (Abstract only).

K.A. Sallam, C. Aalburg, K. Lee, C.-L. Ng and R. Sankarakrishnan "Breakup of Turbulent and Non-Turbulent Liquid jets in Gaseous Crossflows," AIAA paper No. 2006-1517, 44th AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2006, (Invited).

C. Aalburg, B. Van Leer, G.M. Faeth, and K.A. Sallam (2005), "Properties of Nonturbulent Round Liquid Jets in Uniform Gaseous Crossflows," Atomization and Sprays 15(3):271-294.

K.A. Sallam, C.-L. Ng, and R. Sankarakrishnan, "Bag Breakup of Liquid Jets in Gaseous Crossflow," APS 58th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 50, No. 9, pp. 184-185, 2005 (abstract only).

G. Bassiri, N. B. Phelps and K.A. Sallam, "Apple Snail: a Bio Cleaner of the Water Free Surface," APS 58th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 50, No. 9, pp. 247, 2005 (abstract only).

G. Bassiri, B. Miller and K.A. Sallam, "Apple Snail: A Bio Cleaner of Free Surface," APS 58th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 50, No. 9, pp. 10, 2005 (Video Entry).

R. Sankarakrishnan and K.A. Sallam, "Bubble nest of Siamese Fighting Fish," APS 58th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 50, No. 9, pp. 9, 2005 (Video Entry).

B. Miller, and K.A. Sallam, "Comparison of Different Holographic Techniques and Their Application to Sprays," OKLAHOMA RESEARCH DAY, University of Central Oklahoma, Edmond, Oklahoma, November 11, 2005 (poster only).

R. Sankarakrishnan, and K.A. Sallam, "Properties of Turbulent Liquid Jets in Gaseous Crossflow," OKLAHOMA RESEARCH DAY, University of Central Oklahoma, Edmond, Oklahoma, November 11, 2005 (poster only).

S. Bogadi, and K.A. Sallam, "Properties of Round Nonturbulent Liquid Jets in a Cross Electric Field," OKLAHOMA RESEARCH DAY, University of Central Oklahoma, Edmond, Oklahoma, November 11, 2005 (poster only).

C.-L. Ng, and K.A. Sallam, "Wave Phenomena and Droplets Properties of Liquid Jets within the Bag Breakup Regime," OKLAHOMA RESEARCH DAY, University of Central Oklahoma, Edmond, Oklahoma, November 11, 2005 (poster only).

R. Sankarakrishnan, K.A. Sallam, and F.W. Chambers "Effects of Turbulence on the Breakup of Round Liquid Jets in Gaseous Crossflow," ASME paper No. FEDSM2005-77407, ASME Fluids Engineering Summer Conference, Houston, TX, June 2005.

C.-L. Ng, K.A. Sallam, H.M. Metwally, and C. Aalburg "Deformation and Surface Waves Properties of Round Nonturbulent Liquid Jets in Gaseous Crossflow," ASME paper No. FEDSM2005-77469, ASME Fluids Engineering Summer Conference, Houston, TX, June 2005.

S. Bogadi and K.A. Sallam, "Pressure-Assisted Electrostatic Atomization of Liquid Jets," 18th Annual Conference on Liquid Atomization and Spray Systems, Irvine, CA, May 2005 (poster only).

R. Sankarakrishnan, K.A. Sallam, and C.W. Chambers, "Breakup of nonturbulent liquid jets in Turbulent crossflow," 18th Annual Conference on Liquid Atomization and Spray Systems, Irvine, CA, May 2005 (poster only).

C.-L. Ng, K.A. Sallam, H.M. Metwally, and C. Aalburg "Surface Properties of Round Nonturbulent Liquid Jets in Gaseous Crossflow," 18th Annual Conference on Liquid Atomization and Spray Systems, Irvine, CA, May 2005 (poster only).

K. Lee, J.F. Diez, G.M. Faeth, C. Aalburg, and K.A. Sallam, "Breakup of Round Turbulent Liquid Jets in Air Crossflows," Proceedings of the 18th Annual Conference on Liquid Atomization and Spray Systems, Irvine, CA, May 2005 (Awarded the Marshall Award, Toronto, Canada, 2006).

C. Aalburg, G.M. Faeth, and K.A. Sallam, "Primary Breakup of Round Turbulent Liquid Jets in Uniform Gaseous Crossflows," AIAA paper No. 2005-0734, 43rd AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2005.

K.A. Sallam, C. Aalburg, and G.M. Faeth (2004), "Breakup of Round Liquid Jets in Gaseous Crossflows," AIAA Journal 42(12):2529-2540.

S.M. Bogadi and K.A. Sallam, "Monodisperse Nanoparticles Generation by Electrostatic Atomization," APS 57th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 49, No. 9, pp. 17, 2004 (abstract only).

C. Aalburg, K. Lee, G.M. Faeth and K.A. Sallam, "Experimental Study of the Breakup of Turbulent Round Liquid Jets in Gaseous Crossflows," APS 57th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 49, No. 9, pp. 236, 2004 (abstract only).

K.A. Sallam, S.M. Bogadi, and R. Sankarakrishnan, "Fabrication and Transport of Metallic Nano Particles via Electrostatic Atomization," Transport Phenomena in Micro and Nanodevices meeting, Kona, Hawaii, October 2004 (abstract only).

K.A. Sallam, C. Aalburg, G.M. Faeth, K.-C. Lin, C. D. Carter, and T. A. Jackson "Primary Breakup of Aerated-Liquid Jets in Uniform Gaseous Crossflows," Proceedings of the 19th Annual Conference, ILASS-Europe, Nottingham, UK, September 2004.

K.A. Sallam, C. Aalburg, and G.M. Faeth, "Primary Breakup of Nonturbulent Round Liquid Jets in Uniform Gaseous Crossflows," Proceedings of the 19th Annual Conference, ILASS-Europe, Nottingham, UK, September 2004.

S. Jakkamreddy, R. Sankarakrishnan, and K.A. Sallam, "Metallic Nano Particles Generation by Electrostatic Atomization," Oklahoma NSF EPSCoR Annual State Conference, Stillwater, Oklahoma, May 2004, pp. 4 (poster only).

K.A. Sallam, C. Aalburg, G.M. Faeth, K.-C. Lin, C.D. Carter, and T. A. Jackson "Properties of Aerated-Liquid Jets in Supersonic Crossflows," Proceedings of the 17th Annual Conference on Liquid Atomization and Spray Systems, Arlington, Virginia, May 2004.

K.A. Sallam, C. Aalburg, G.M. Faeth, K.-C. Lin, C.D. Carter, and T.A. Jackson "Breakup of Aerated-Liquid Jets in Supersonic Crossflows," AIAA paper No. 2004-0970, 42nd AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2004.

C. Aalburg, K.A. Sallam, and G.M. Faeth, "Properties of Nonturbulent Round Liquid Jets in Uniform Crossflows," AIAA paper No. 2004-0969, 42nd AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2004.

K.A. Sallam and G.M. Faeth (2003), "Surface Properties during Turbulent Primary Breakup of free Liquid Jets," AIAA Journal 41:1514-1524.

K.A. Sallam, C. Aalburg, and G.M. Faeth, "Experimental Study of the Breakup of Nonturbulent Round Liquid Jets in Gaseous Crossflows," APS 56th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 48, No. 10, pp. 27-28, 2003 (abstract only).

C. Aalburg, B. van Leer, G.M. Faeth, and K.A. Sallam, "Properties of Nonturbulent Round Liquid Jets in Uniform Gaseous Crossflow," APS 56th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 48, No. 10, pp. 158-159, 2003 (abstract only).

K.A. Sallam, C. Aalburg, and G.M. Faeth, "Primary Breakup of Nonturbulent Liquid Jets in Gaseous Crossflows," Proceedings of the 16th Annual Conference on Liquid Atomization and Spray Systems, Monterey, California, May 2003 (Featured on the proceeding cover).

K.A. Sallam, C. Aalburg, and G.M. Faeth, "Primary Breakup of Round Nonturbulent Liquid Jets in Gaseous Crossflows," AIAA Paper No. 2003-1326, 41st AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2003.

K.A. Sallam, Z. Dai and G.M. Faeth (2002), "Liquid Breakup at the Surface of Turbulent Round Liquid Jets in Still Gases," International Journal of Multiphase Flow 28:427-449.

K.A. Sallam and G.M. Faeth, "Measurements of Deformation and Breakup of Liquid Jets in Gaseous Crossflows," APS 55th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 47, No. 10, p. 43, 2002 (abstract only).

K.A. Sallam, Z. Dai, and G.M. Faeth, "Turbulent Primary Breakup of Round and Plane Liquid Jets in Still Air," AIAA Paper No. 2002-1115, 40th AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2002.

K.A. Sallam and G.M. Faeth, "Surface Properties of Turbulent Liquid Jets in Still Air," APS 54th Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 46, No. 10, p. 136, 2001 (abstract only).

K.A. Sallam, Z. Dai, and G.M. Faeth, "Liquid Breakup Properties at the Surface of Turbulent Liquid Jets in Still Air," 14th Annual Conference on Liquid Atomization and Spray Systems, Dearborn, Michigan, May 2001, pp. 301-303 (poster only).

K.A. Sallam, G.M. Faeth, and Z. Dai, "Turbulent Primary Breakup of Round and Plane Liquid Jets," APS 53rd Annual Meeting of the Division of Fluid Dynamics, Bulletin of the American Physical Society, Vol. 45, No. 9, pp. 176-177, 2000 (abstract only).

K.A. Sallam, Z. Dai, and G.M. Faeth, "Turbulent Primary Breakup of Round and Plane Liquid Jets in Still Air," 8th International Conference on Liquid Atomization and Spray Systems, Pasadena, California, 16-20 July 2000, pp. 167-168 (poster only).

K.A. Sallam, Z. Dai and G.M. Faeth (1999), "Drop Formation at the Surface of Plane Turbulent Liquid Jets in Still Gases," International Journal of Multiphase Flow 25:1161-1180.

K.A. Sallam, Z. Dai, and G.M. Faeth, "Breakup of Turbulent Liquid Jets in Still Gases," AIAA Paper No. 99-3759, 30th AIAA Fluid Dynamics Conference, Norfolk, Virginia, June 1999.

K.A. Sallam, Z. Dai, and G.M. Faeth, "Breakup Lengths of Turbulent Liquid Jets in Still Gases," Proceedings of the 12th Annual Conference on Liquid Atomization and Spray Systems, Indianapolis, Indiana, May 1999, pp. 219-223.

Z. Dai, K.A. Sallam, and G.M. Faeth, "Turbulent Primary Breakup of Plane Free Bow Sheets," Proceedings of the 22nd Symposium on Naval Hydrodynamics, National Academy Press, Washington, D.C., 1998, pp. 568-581.

K.A. Sallam, A.S. Sabry, M.A. Serag-Eldin, and M.A. Fouad, "Characteristics Based Nonlinear Simulation of Reactive Silencers," Proceedings of the International Congress on Fluid Dynamics & Propulsion, Cairo, Egypt, December 1996, pp. 370-385.